RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.
We've covered validation in many articles, but it's worth re-examining. ASQA defines it as a quality review of the assessment procedure.
Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.
The 2015 SRTOs Clause 1.8 requires RTOs to make sure their assessment systems, including RPL, are compliant with training package requirements and conducted per the Principles of Assessment and Rules of Evidence.
As per the standards, two kinds of validation are required.
The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.
The following validation type ensures that assessments follow the principles of assessment and rules of evidence.
Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.
The Two Types of Assessment Validation Explained
The Basics of Assessment Validation
As discussed before and in previous blogs, validation includes two processes: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also known as pre-assessment validation or verification, pertains to the first part of the clause, focusing on ensuring all unit requirements are met and that all workbooks are fully compliant.
Conversely, post-assessment validation focuses on the implementation side, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
This article will focus on assessment tool validation.
Conducting Assessment Tool Validation
With a clear understanding of the two types of validation, let’s focus on assessment tool validation.
Best Times to Conduct Assessment Tool Validation
Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.
Hence, whenever new learning resources are bought, assessment tool validation is necessary before student use.
There's no need to wait for your next 5-year cycle validation schedule. Validate new resources immediately to ensure they are suitable for student use.
However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:
- resources are updated
- new training products are added on scope
- you review your course against training product updates
- learning resources are identified as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based regulatory approach means RTOs should conduct regular risk assessments. Complaints from students about learning resources are a prime opportunity for assessment tool validation.
Determining Training Products for Validation
Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.
Resources Required for Assessment Tool Validation
Academic Resources
To validate your assessment tools, you will need the complete set of your learning resources:
Mapping tool – start by investigating this document. It shows which assessment items meet unit requirements, facilitating quicker validation.
Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item exist. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – these might include checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are appropriate for the assessment task and meet unit requirements.
Assessment Validation Panel
Clause 1.11 specifies the requirements for validation panel members. It states validation can be performed by one or more people. However, RTOs usually require all trainers and assessors to participate, sometimes including industry experts.
The members of your validation panel must collectively have:
Current vocational competencies and relevant industry skills for the unit being validated
Up-to-date expertise and skills in vocational teaching and learning
Either of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or an equivalent successor
Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool aids in both the validation process and documentation. It helps visualize how each assessment item meets each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.
While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.
Principles of Assessment Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While these templates facilitate the validation process, they can result in judgment errors due to the read more limited space for comments on each assessment item.
We strongly recommend using a more detailed template to inspect each unit requirement and the assessment items that map to them. Here is an example:
Element Performance Criteria Assessment Directions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Examine?
As mentioned in our blog post Common Problems In Assessment Tools, you need to ensure that your assessment tools allow trainers to follow assessment principles and evidence rules.
Essential Principles of Assessment
Fairness – Does the assessment provide equal opportunity and access to all participants?
Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?
Validity – Is the assessment testing what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment give the same results every time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Evidence Key Rules
Validity – Is the evidence showing that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to confirm the learner has the required skills and knowledge?
Authenticity – Is the assessment tool proving that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?
Although these are frequently covered in VET professional development and nationally recognised training, many tools still struggle to meet these requirements.
To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:
Follow Through with Actions
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Carry out each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication in accordance with service and regulatory requirements:
change diapers
bottle preparation, feeding infants from bottles, and cleaning equipment
prepare solid food and feed infants
appropriately respond to infant signs and cues
prepare infants for sleep and settle them
monitor and foster age-appropriate physical exploration and gross motor skills
Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Look Out for Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
All or No Competence
Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity
Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What sort of information can be included in a work package?
Possible answers include:
Compulsory resources
Related costs
Length of activities
Appointed roles and responsibilities
When an assessment item calls for several answers, indicate the number of answers required from a student. This way, your assessment remains reliable, and the evidence collected is valid.
The same applies to assessment items with double-barrelled questions or questions that ask for more than one answer simultaneously. These can confuse both students and assessors, as illustrated in the example below:
Name a hazard and/or environmental concern in the work area and choose the most effective hazard control hierarchy.
Possible answers may include, but are not limited to:
Weather conditions – isolating the work area, engineering controls, PPE
Work area and ground conditions – elimination, isolating, engineering controls
People – isolation, engineering, administrative controls
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolating, engineering, administration
Equipment or machinery – isolation, use of engineering controls, administration
Avoiding double-barrelled questions makes it easier for students to answer and for assessors to judge competence accurately.
Given these requirements, you might think, “Don’t learning resource developers provide audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This impacts your compliance history, so it’s wiser to take the safe and compliant route.